Adjust the base stations so that the front panels are facing toward the center of the play area. Attach the power cables to the base stations, and then plug them each into a power outlet to turn them on. The status lights should be green. Connect the base stations . .
Adjust the base stations so that the front panels are facing toward the center of the play area. Attach the power cables to the base stations, and then plug them each into a power outlet to turn them on. The status lights should be green. Connect the base stations . .
Before installing the base stations, decide first whether you want to set up a room-scale or seated/standing-only play area. See Planning your play area. Important: During unboxing, remove the thin film that covers the front panel of the base stations. Mount the base stations diagonally at opposite. .
In this step-by-step guide, we will walk you through the installation process with clear and concise instructions, making the setup of your base station as easy as possible. With the HTC Vive Base Station, you can enjoy precise motion tracking and a larger play area, enhancing the overall VR gaming. .
Page 2 Overview Set up your base stations at opposite corners of your space, diagonally and above head height (ideally more than 2 meters or 6.5 feet from the floor). For proper tracking, make sure the two base stations aren’t more than 5 meters or 16 feet apart. up to 5 meters Screw x 4 Wall. .
This section describes how to connect your Base Station and ViveTracker equipment. In Table 2 below, you will find a list of the Motion Tracking Hardware components. Provides a wireless connection for Vive Trackers, but it is recommended to connect trackers with cables and dongle for best tracking. .
Before you start connecting your HTC Vive base stations, it’s essential to gather all the necessary tools to ensure a smooth setup process. Having the right tools at hand will save you time and frustration. Below is a list of the tools you’ll need: Screwdriver: A screwdriver will be essential for. .
Set up your base stations at opposite corners of your space, diagonally and above head height (ideally more than 2 meters or 6.5 feet from the floor). For proper tracking, make sure the two base stations aren’t more than 5 meters or 16 feet apart. You can use the included mounting kit, but base.
